Light Blue Dolphin
RESEARCH & DEVELOPMENT
research & development
LIGHT BLUE DOLPHIN
Laboratories and equipment designed to work in syntropy, creating devices dedicated to the improvement of the quality of life.
Via Gaudio 12, 18038 Sanremo, Italy
Copyright 2019 © lightbluedolphin.com
All Rights Reserved.
What is the Fdl Megatron?
The technology of “lotus Flower Megatron imploder 2” is made of machines of new generation, suitable revolutionize many aspects of the industry, and in particular in the specific field of “recycling” an almost total waste produced by our so said civilization. It acts, standing alone or being complementary, with technologies suitable for the pulverization in total, and dehydration in addition to the complete sterilization of the treated materials.
Each component to be treated or recycled as it is introduced, it undergoes into processes to pulverize, dehydrate and sterilize any agent highly pathogenic the powdery material coming out.
An optimization study of this amazing technology makes it possible in a single step, transformations are beneficial for both the environment and for the economy of this process. For the environment, “Lotus Flower” could be decisive for the clean-up, re-using and transforming into a wealth-sell such substances immediately reusable, the processed products, since beating cleansed from the pollution and reduces the annoying volume of at least 50% and more, depending on the substance treated, up to values close to 80%. Significantly reducing the volumes avoids overly, thanks to a vigorous pasteurization, that any organic compounds in the decomposition, can emit unpleasant odors, unpleasant and polluting fumes degrading the environment.
The whole process does not emit into the atmosphere any form polluting! The powders obtained are similar to talcum powder, cement powder, lime powder and ready-mixed plasters and concerning the security follow the same rules in order not to be inhaled by the people who deal with or use. Merge once again in the form of pellets, nuts, or anything else, or bagged, or conveyed with aspire compressors in suitable containers, to avoid any hazard to men, animals or plants.
It is surprising the versatility of the Lotus Flower, which is applicable in countless areas of productivity and environmental protection of the planet. Chains of disassembly and pulverization of the matter diligently and with differentiated firmed are one of the targets of the Lotus Flower, since the product of this machine converted completely, and at low cost, the waste, the pollutants in the most important sectors of human waste riciclandoli. The amp horizons in which they can be focused employment opportunities of the machine, must be examined and carefully considered by the industrial ready to capture the significant opportunities that such a tool can offer to the community. The application areas can in this way assume a very different opportunity with great employment opportunities from the food to mining, including treatments:
The potential of the Lotus Flower are many, and without boundaries: every industrial will be able to have the model calibrated for his specific case. Having logics complementary and addizionabili to the Lotus Flower, such as devices facilitating the pretriturazioni or compaction of the powders of the final phase, the programs computerizzabili will follow patterns dictated by the logic of the field of application where it clearly appears the indisputable competition of the Lotus Flower in relation to the previous choices of both for the economy for the drastic reductions of steps in the supply chain.
This machine benefits from its productivity and purity of result achievable in each sector. The Lotus flower sums up in its technologies and the quality well-known: speed, economy, performance.
The system Lotus Flower is based on the logic of the clusters generated by the resonance frequencies of the toroidal swirling in a soundboard that can have different forms of geometric solids, depending on the results that you want to get.
As the frequencies increase, the three-dimensional geometric figures will change and therefore increase the complexity of their form.
The resonance of these clusters has more the logic of interactivity. In a volume of fluid swirling in the sense of the left in our hemisphere, these resonant frequencies, generate rigidity, and synergy at the same time while the flow of the vortex auto-tune, generating powerful energies in which the measure of the possible range of pressures of over 350 Bar and temperatures of over 2,000 degrees Celsius alternating vortices of gas in the ascent-adiabatic close to the 200 degrees Celsius below zero. For this to happen, we need to pulsing the mass swirling in different ways depending on the results implosivi desired.
As a beginning, was created as early as 1991, a blower of the three nozzles used in compressors from the construction site, in a pipe of 100 mm in the bike on the left, obtaining the first calculations had provided for giving the impetus to the assiduous research of the next few years.
The use of this innovative technology, protected by international patents and are the exclusive property of the Light Blue Dolphins Ltd, (LBD) has led to the development and implementation of a system of
“spraying” not mechanic (without friction) of the materials, the effects of which the
main are: Pulverisation, Dehydration and Sterilisation.
In fact, the LOTUS FLOWER as a final result is able to obtain on the materials in the
processing of the above-mentioned three main findings:
These different and contemporary processes occur in a very short time (less than a
few seconds) and all of them in a single step.
The Pulverization takes place, according to the calibration of the machine, with the
effect of obtaining a particle size ranging from 0.1 to 80 microns.
The Dehydration is because all the solid particles once ground are conveyed towards
the bottom, whereas the vapour and any gas escaping upwards along the duct of the
extraction. Of course, at the end of this conduit must be applied to a dust in order to
eliminate a very small amount of micro dust that can exit in this direction (especially in the starting phase of the transient before reaching the steady-state operation).
The Sterilization is performed because the inside of the vortex you create the huge gap of temperature in distances of short (from + 600° C to -170° C in intervals of approximately 150-200 microns), and at the same time generate micro-shock waves around 150-3500 atm.
The hardware LOTUS FLOWER can be finished with a pre-implosore peripheral, which can increase the input volume, and then the quantity of the treated material.
On the basis of the experiments described above we found that the Lotus Flower Model FDL 2400 was able to process up to 150 cubic meters per hour with pre-implosion peripherals, transforming it into fine powder, with a volume reduction of about 70% of the density inserted media. The powder thus obtained is dehydrated and has a diameter close to 10 microns (hundredth of a hair).
As for the electric consumption the FDL 2400 realized in 2010 (diameter of 2.400 millimeters) it was 350 KW / h in working condition at steady state (energy needed to move the air compressors).
As for the new version of the FDL 2400 (currently in the advanced design phase) we believe it is possible to achieve better technological results with a reduced consumption of around 220 - 240 kWh always in steady state.
The various machines made and tested were in a position to work 24 hours a day for two consecutive months with only a few hours of inactivity for the maintenance of the air compression turbine.
The intense and costly activity of realization and experimentation has become necessary since, as previously mentioned, the fluid and thermodynamic events that occur cannot be simulated with any type of CFD (Computational Fluid Dynamics) electronic calculation
In fact the experimentation carried out has shown that while dehydration and sterilization take place in every situation where the vortex system is developed, the energy efficiency and the dimensions of the pulverized elements depend on various factors such as:
Once the variability factors were acquired, the FDL 1200 Lotus Flower (2014 version) was started to be designed which, through the possibility of electronically adjusting the various inflow parameters, the presence of status detection encoders, and a customized software it is able to adapt to the various needs of the materials to be pulverized, ensuring the highest possible energy consumption.
FDL Megatron Imploder, the future in your hands ... BEYOND current physics.
The device is designed to efficiently and easily grind, dry and dehydrate various materials ...
It is suitable for most fine grinding and mixing applications in mining, mining, cement production, food processing, energy production, gasification, ingredient processing, agriculture and in the production of cosmetics, paints, chemicals and pharmaceuticals. It performs these processing tasks at significantly lower costs and with greater efficiency than conventional equipment. Eliminates pathogens and odors.
Maintains nutritional integrity in processed food products.
The extraction refers to secondary extraction, in the open and above the removal of materials used for secondary applications such as construction, road construction, cement, glass, agriculture, etc. A number of aggregate materials are also used in food products for human and animal consumption.
Cereals and seeds: FDL can treat a wide range of cereals and seeds very efficiently. It processes whole grains and seeds more efficiently than conventional milling equipment, thanks to its ability to split the husk to a finer fraction.
Coal: Many countries around the world burn brown coal as a fuel source to generate electricity. Although brown coal is abundant and relatively easy to reach, one of its disadvantages is that it contains up to 65% moisture, which significantly hinders its ignition. In fact, up to two thirds of the energy generated by the combustion of brown coal is lost in the drying process as it enters the furnace. As a result, many of these power plants have an unenviable efficiency index of less than 15%.
In the food industry: FDL has the ability to process numerous ingredients, separately or simultaneously, in very fine fractions. The absence of heat during the process provides a number of positive aspects for the industry. FDL can also be used as a blender or mixer that can remove a number of steps from the production sequence.
Liquid coal: Liquid coal technology requires that the coal be ground to fine particles and dried before being turned into gas and then liquefied.
A wide range of industrial processes requires extremely fine particle sizes to be used in the production of cosmetics, paints, chemicals, pharmaceuticals and ingredients for food and beverage production. These industries will benefit greatly from FDL with a reduction in the cost of refining their ingredients and more consistent particle sizes with unadulterated outputs.
Glass: FDL can efficiently process huge volumes of glass for reuse in secondary glass production at significantly lower costs and at significantly higher speeds than is currently possible.
Tires: Most western countries have now banned the burning and burial of tires as a form of disposal. The pollution caused by combustion is obvious, however, many of the problems associated with the use of landfill tires, such as earth movement many years after it was filled, are not commonly known.
Waste: FDL can be used in numerous recycling applications; however, and is particularly suitable for processing household waste, metal objects, plastic material or long chain molecular structures in general.
Cereals and seeds: FDL can process a wide range of cereals and seeds very efficiently. It processes whole grains and seeds more efficiently than conventional milling equipment, thanks to its ability to split the husk to a finer fraction. FDL reduces the number of passages required in the milling process, thus reducing energy costs and the final cost of the final product. The flour produced is usually higher in nutritional value due to the absence of heat generated by friction in conventional grinding processes. Surprisingly, the flour made from cereals and seeds processed by the FDL does not require preservatives to avoid rancidity. Normally whole wheat flour becomes rancid within 3 months of production, even when it is processed by microwave sterilization and added preservatives, however, the flour produced by FDL processing will remain sterile from pathogens for years after processing, thus eliminating the need to use hazardous processing methods and unwanted preservatives. Real natural and organic flour can only be produced from FDL processing.
FDL also has the unique ability to repatriate contaminated grains in a high quality flour, removing moisture and pathogens from it during processing. This is of considerable benefit in areas where a significant amount of grain is lost due to moisture and contamination by pathogens and in regions where high humidity and precipitation produce harmful effects.
Oil: In oil extraction processes, the unique ability of FDL to break the skin structure makes more oil available than is possible with pressure or solvent extraction methods.
videos produced by one of our German subsidiaries